RaceFlux Straight Push-Lock Hose End Fitting, 5/16" Barb to -6AN Female

Description

Specifications
RaceFlux Part Number:
PL-05-06
Size:
5/16'' Barb to -6AN Female
Fitting Angle:
Straight
Connection Types:
AN Flare Female, 37º JIC,Hose Barb
Port A:
Hose Barb, Push-Lock
Port B:
AN Flare Female, 37º JIC
Tee Port (if applicable):
, ,
Primary Material:
6061-T6 aluminum
Finish:
Type II Anodized
Color:
Black
O-ring Material (if applicable):
Swivel Seal Material (if applicable):
Lock Ring Material (if applicable):
Operating Conditions
Max Operating Pressure:
250 psi (17.24 bar)
Max Operating Temp:
302°F (150°C)
Min Operating Temp:
-40°F (-40°C)
Fluid Compatibility:
Air and gas,Alcohol,Coolants,Engine oil,Ethanol-based fuels (E85+),Ethanol/gasoline mixtures,Gear oil,Methanol,Nitromethane ,Nitrous Oxide,Power Steering Fluid,Racing fuels,Transmission fluid,Vacuum,Water
Applications:
Breather and vent lines,Fuel (in-tank),Fuel (outside of tank),Gauge and sensor lines,Hydraulics, low pressure (return lines),Other oil, water, and air systems,Vacuum lines
Description
Push-lock fittings are for use with soft rubber hose or Aeroquip "Socketless" hose. Hose and fittings are easy to install: they simply push on with some heat and lubricant, and "lock" in place. The hose will not slide off the fitting because it compresses on the fitting as pressure increases, similar to the effect of a Chinese finger trap.
Fittings are black anodized aluminum. Assembled hose is rated for up to 300 degrees F and 250 PSI when used with Aeroquip's Socketless hose. Hose clamps are required to ensure the hose does not back off at higher pressures.
Features and Benefits
Easy to assemble push-lock style fitting for rubber fuel, transmission, and PCV hose, or Aeroquip socketless hose
Straight fitting in AN thread
Lightweight black anodized aluminum
36% lighter than traditional screw-type line fittings